Products
Vaporizer manufacturer: choose by heat source
Four ways to turn LNG, LPG, LN₂, NH₃ and CO₂ into gas. The right one depends on climate, available utilities and capacity.
Choosing a heat source
Capacity ranges and pressures as listed on each product page.
| Type | Heat source | Capacity | Design pressure | Typical fit |
|---|---|---|---|---|
| Air ambient | Ambient air only | LPG 50–1,000 kg/h; other gases 100–10,000 Nm³/h | 1.6 MPa | Outdoor LNG / cryogenic gas stations where no power or steam is wanted |
| Electric water bath | Electrically heated water | 50–1,000 kg/h series | 0–2.5 MPa | Cold climates, ignition gas, where electricity is available |
| Water bath | Circulating hot water | 50–3,000 kg/h | Up to 2.5 MPa | Continuous LPG supply, boilers and filling plants |
| Steam heated | Steam | Customised (references: 25,000 kg/h LPG; 50,000 kg/h LCO₂) | Per project | Large-scale duty with a reliable steam supply |
Tell us your gas, flow and pressure.
We come back with a configuration and quotation basis for your conditions.